Ordinary slitting strip provide the ratio of width & thickness up to 10 , our company specialty manufacture slitting strips that the ratio of width & thickness below 10. Our company precision slitting strip production of gauge 0.05-1.5mm & width 1-15mm : camber≤3mm/m, edge blur≤0.03mm, weight of width≥2.5kg/mm. Production levels of the precision slitting strip is attain to the quality of that from Japan. Edge state of the strip is round edge or slitting edge or square edge or chamfer edge. Forms of supply are coil and spool. Inside diameter of strip coil is Φ150 or Φ200 or Φ250 or Φ300mm, outside diameter is below 800mm. The product covers the stainless steels, soft magnetic alloys, permanent magnetic (semi-hard magnetic) alloys, elastic alloys, expansion alloys, tri-metal, high temperature alloys, corrosion resistant alloys & nickel alloys etc.
Gauge Range
0.05×1.5 mm、0.1×2 mm、0.3×1.9 mm、0.25×4 mm、0.35×3.5 mm、0.36×2.5 mm、0.4×2.8 mm、0.5×5 mm、0.55×2.8 mm、0.6×3.6 mm、0.8×7 mm、1.0×8 mm、1.2×12 mm、1.5×15 mm。
Edge state
|
Type of edge |
Sample |
Thickness mm |
Width
mm |
Tolerance of Width
mm |
|
Slit Edge |
|
0.05~1.5 |
≥1.5 |
±0.10 |
|
Square Edge |
|
0.1~1.5 |
≤60 |
±0.05 |
|
Round Edge |
|
0.15~1.5 |
≤50 |
±0.025 |
|
Chamfer Edge |
|
0.15~1.5 |
≤50 |
±0.010 |
Trademark
0Cr16Ni14(S12S1、S12S2)、0Cr18Ni12 (SUS305)、1Cr17 (SUS430)、3Cr13 (SUS420J2)、6Cr13Mo、ASL813、ASL817、9Cr18MoV(SUS440C)、1Cr17Ni7 (SUS301)、0Cr18Ni9 (SUS304)、00Cr19Ni10 (SUS304L)、0Cr17Ni14Mo2 (SUS316)、00Cr17Ni14Mo2 (SUS316L)、0Cr17Ni7Al (SUS631 or 17-7PH)、0Cr15Ni7Mo2Al(SUS632 or PH15-7Mo)、1J50、1J51 、1J79、1J85、1J77、1J22、SEM、NAT、2J4、2J85、3J1、3J9、3J21、3J53、4J36、4J29、4J33、4J42、5J1480、5J20110、GH90、GH2132、GH3030、GH3033、GH4169、GH696、GH163、Inconel600、Incoloy800、Hastelloy C-276、904L 、TA1、TA9、TA10、TB3、TC4、65Mn、60Si2MnA、50CrVA、T8、T10A、T12A、T2、H63、HPb59-2、QSn7-0.2、QAl10-4-4、B10、BZn15-20
 
|
